At my wits end lads

Forums › Forums › General Questions › At my wits end lads

  • This topic is empty.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • November 11, 2017 at 3:07 am #842
    seoirse1980
    Participant

    So this little vixen is proving to be the devil reincarnated but I’m gonna get her right yet!

    I have a brake issue…

    Brakes were leaking with no obvious fluid leaks. Changed load sensor valve, hard and flexi brake lines. 3 master cylinders as the first two were new and leaky. Benched the m.c now and all seems good.

    Had difficulty with drum brakes on rear so decided to get an upgrade kit from Portugal, now the issue is not enough pressure going to new disk brakes on rear…

    Anyone any thoughts please …?? Disk assembly is from Audi

    4 Mechanic’s now over last 12 months and still no joy….

    Best regards,

    George

    November 18, 2017 at 12:04 am #1006
    WesleyPegden
    Member

    I would have thought disc calipers required more fluid than drum wheel cylinders so you’d have to use a different master cylinder with the extra capacity. ie master cylinder with larger internal bore.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.